Our price is 25% below leading suppliers of flue pipes. Compare our prices with your local hardware store and see how much you can save!
Wild Goose Stoves are the proud national stockist of high quality 316 stainless steel, heavy duty, matt black interior pipes. We stock both quality stainless steel insulated and black single wall flue pipes in a range of sizes: 3 inch, 5 inch and 6inch.
Twin Wall Flue Pipes & Accessories.
Twin Wall Straight Length 250mm Stainless Steel
-
80mm (3'') - €25
100mm (4'') - €26
130mm (5'') - €37
150mm (6'') - €39
-
The Twin Wall Straight Length 250mm is a fundamental component for the construction, in the vertical or sub-horizontal sections, of a Chimney System in accordance with the requirements of UNI EN 1856-1.
-
Inner Wall: Stainless Steel 316L BA (EN 1.4404 - L50) 0.5 mm thick.
Outer Wall: Stainless Steel 304 BA (EN 1.4301 - L20) thickness 0.5 mm or Copper 0.6 mm thick.
Insulation: Rock wool, thickness 25 mm, density 90 kg / cubic meters.
Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.
Belling: cold moulding, done with a mold and counter mold hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.
Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.
-
Twin Wall Zara Cowl
-
80mm (3'') - €55
100mm (4'') - €65
130mm (5'') - €69
150mm (6'') - €79
-
The Twin Wall Zara Cowl is the component that is installed as protection against bad weather, at the top of a flue.
Its design ensures the free flow of smoke and gases, preventing the entry of rain even in a heavy downpour.
-
Inner Wall: Stainless Steel 316L BA (EN 1.4404 - L50) thickness 0.5 mm
Outer Wall: Stainless Steel 304 BA (EN 1.4301 - L20) thickness 0.5 mm or 0.6 mm thick Copper.
Disks and Fixture Inside: Stainless Steel 304 BA (EN 1.4301 - L20), respectively, in thicknesses of 0.5 mm and 1.5 mm.
Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.
-
Blind Cap Stainless Steel
-
80mm (3'') - €31
130mm (5'')- €35
150mm (6'')- €37
-
The Blind Plug represents the fundamental component for the collection of unburned products of a Chimney System according to UNI EN 1856-1.
Its use is not intended for systems that generate condensation.
-
Internal wall: 316 BA stainless steel (EN 1.4404 - L050) thickness 0.5 mm.
External wall: 304 BA stainless steel (EN 1.4307 - L030) thickness 0.5 mm or copper thickness 0.6 mm.
Insulation: Rock wool cups, 25 mm thick, density 90 kg/m3.
Welding: with TIG process, by fusion of contiguous edges without adding material.
Belling: cold moulding, made with a hydraulic expansion system of the matrix and countermatrix which guarantees calibrated couplings with a tolerance of +/- mm 2.
Accessories: triple lip silicone gasket, to guarantee the seal between the joints; locking strap, to guarantee tightening and continuity of the system.
-
Wall Support Side Plates
-
130mm (5'') - €29
150mm (6'') - €31
-
The Wall Support Side Plates, together with the intermediate plate or the base plate, are static support components of a Chimney System, in accordance with the requirements of UNI EN 1856-1 or of a Flue.
-
Materials used: Stainless Steel 304 BA (EN 1.4301 – L20), Stainless Steel 316 BA (EN 1.4404 – L50) or Copper.
Thickness: 2.00mm.
-
Adjustable Wall Band
-
80mm (3'') - €15
100mm (4'') - €16
130mm (5'') - €17
150mm (6'') - €18
-
The Adjustable Wall Band is the support needed to anchor the vertical components of a chimney system to a wall in accordance with the requirements of UNI EN 1856-1.
-
Materials used: Stainless Steel 304 BA (EN 1.4301) or Copper, in the thicknesses appropriately described.
It consists of a BASE (mm thickness varying from 1.50 to 2.00 mm, depending on the chosen diameter), the part to be fixed to the wall; and a BAND (the thickness varying from 1.00 mm to 1.50 mm, depending on the chosen diameter), whose function is to secure each component of the Chimney System to the BASE.
The unique feature of this wall band is that it provides support with the possibility of regulating the distance from the wall from 50/80 mm for diameters 80-180 mm and from 50/100 for diameters of 200-450 included.
Hardware included, with the exception of bolts and dowels for fixing to the wall.
-
Twin Wall Straight Length 500mm Stainless Steel
-
80mm (3'') - €39
100mm (4'') - €49
130mm (5'') - €54
150mm (6'') - €59
-
The Twin Wall Straight Length 500mm is a fundamental component for the construction, in the vertical or sub-horizontal sections, of a Chimney System in accordance with the requirements of UNI EN 1856-1.
-
Inner Wall: Stainless Steel 316L BA (EN 1.4404 - L50) 0.5 mm thick.
Outer Wall: Stainless Steel 304 BA (EN 1.4301 - L20) thickness 0.5 mm or Copper 0.6 mm thick.
Insulation: Rock wool, thickness 25 mm, density 90 kg / cubic meter.
Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.
Belling: cold moulding, done with a mold and counter mold hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.
Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.
-
45° Bend Stainless Steel
-
80mm (3'') - €45
100mm (4'') - €49
130mm (5'') - €59
150mm (6'') - €63
-
The Twin Wall 45° Bend is the fundamental component for changing direction of the vertical or sub-horizontal sections of a flue or a Chimney System in accordance with the requirements of UNI EN 1856-1.
-
Inner Wall: Stainless Steel 316L BA (EN 1.4404 - L50) 0.5 mm thick.
Outer Wall: Stainless Steel 304 BA (EN 1.4301 - L20) thickness 0.5 mm or Copper 0.6 mm thick.
Insulation: Annular air space 25mm thick.
Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.
Belling: cold moulding, done with a mould and counter mould hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.
Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.
-
Single-Twin Adaptor Stainless Steel
-
80mm (3'') - €38
100mm (4'') - €40
-
The Single Twin Adaptor is a component that allows the passage from a single wall system to a twin wall system.
-
Inner Wall: Stainless Steel 316L BA (EN 1.4404 - L50) 0.5 mm thick.
Outer Wall: Stainless Steel 304 BA (EN 1.4301 - L20) thickness 0.5 mm or Copper 0.6 mm thick.
Insulation: Rock wool, thickness 25 mm, density 90 kg / cubic meter.
Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.
Belling: cold moulding, done with a mould and counter mould hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.
Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.
-
Joint Locking Bands
-
80mm (3'') - €8
100mm (4'') - €9
130mm (5'') - €10
150mm (6'') - €10
-
The Joint Locking Band is the accessory needed to secure every joint and create continuity in a twin wall Chimney System or a Flue. Together with the triple lip silicone gasket they ensure the system is sealed in accordance with the requirements of UNI EN 1856-1.
-
Material Used: Stainless Steel 304 BA (EN 1.4301 - L20) or Copper.
Hardware needed for securing is included.
-
Locking Bands and Supports
-
Pair - €9
-
Pair of Extensions necessary to anchor the vertical components of a Fireplace System at greater distances from the wall, in compliance with the UNI EN 1856-1 regulation.
-
Materials used: 304 BA stainless steel (EN 1.4307) or copper.
Thickness 2.00 mm, size 40/43 mm x 260 mm equipped with 8 holes diameter 8 mm center distance 30 mm.
Hardware, nut and bolt supplied.
Blister packs of 2 pieces.
-
Stainless Steel Flex Rolls
-
80mm (3'') - €25 per Meter
130mm (5'') - €29 per Meter
150mm (6'') - €37 per Meter
-
The Stainless Steel Flex Rolls series is made of stainless steel 0.10 / 0.12 mm. The length of the roll varies according to the diameter chosen.
-
Produced in rolls of varying length depending on the chosen diameter with smooth interior and corrugated exterior. Achieved through the helical winding of a strip of aluminium 0.10mm thick, corrugated longitudinally and crimped with the use of superimposed rollers in order to ensure consistency and seal in the product.
Minimum bending radius = 1.5 times the outer diameter of the duct.
-
Twin Wall Straight Length 1000 mm Stainless Steel
-
80mm (3'') - €70
100mm (4'') - 79
130mm (5'') - €99
150mm (6'') - €110
-
The Twin Wall Straight Length 1000mm is a fundamental component for the construction, in the vertical or sub-horizontal sections, of a Chimney System in accordance with the requirements of UNI EN 1856-1.
-
Inner Wall: Stainless Steel 316L BA (EN 1.4404 - L50) 0.5 mm thick.
Outer Wall: Stainless Steel 304 BA (EN 1.4301 - L20) thickness 0.5 mm or Copper 0.6 mm thick.
Insulation: rock wool, thickness 25 mm, density 90 kg / cubic meter.
Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.
Belling: cold moulding, done with a mold and counter mold hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.
Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.
-
90° Tee Stainless Steel
-
80mm (3'') - €75
100mm (4'') - €79
130mm (5'') - €85
150mm (6'') - €99
-
The Twin Wall 90° Tee is the fundamental component for connecting horizontal sections with the vertical in a Chimney System in accordance with the requirements of UNI EN 1856-1, or in a flue.
-
Inner Wall: Stainless Steel 316L BA (EN 1.4404 - L50) 0.5 mm thick.
Outer Wall: Stainless Steel 304 BA (EN 1.4301 - L20) thickness 0.5 mm or Copper 0.6 mm thick.
Insulation: Rock wool, thickness 25 mm, density 90 kg / cubic meter.
Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.
Belling: cold moulding, done with a mould and counter mould hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.
Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.
-
Base Support Plate
-
130mm (5'') - €85
150mm (6'') - €89
-
The Twin Wall Base Support Plate is the static support component of a Chimney System, in accordance with the requirements of UNI EN 1856-1or of a flue.
It may be used to provide base or intermediate support. In the second case, it must always be used in combination with a pair of wall support side plates.
-
Materials Used: Stainless Steel 304 BA (EN1.4301 - L20), Stainless Steel 316 BA (EN 1.4404 - L50) and Copper.
Inner Wall: Stainless Steel 316 BA (EN 1.4404 - L50) 0.5 mm thick.
Outer Wall: Stainless Steel 304 BA (EN 1.4301 - L20) thickness 0.5 mm or Copper 0.6 mm thick.
Insulation: Rock wool, thickness 25 mm, density 90 kg / cubic meter.
Plate: Stainless Steel 304 BA (EN 1.4301 - L20) or Copper, thickness 2.0mm.
Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.
Belling: cold moulding, done with a mould and counter mould hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.
Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.
-
Locking Band
-
130mm (5'') - €4.50
150mm (6'') - €4.50
-
The Stainless Steel Locking Band is the necessary component for securing every joint and creating continuity in a Chimney System. Together with the triple lip silicone gasket it ensures the seal of the system in accordance with the requirements of UNI EN 1856-1.
The product comes in packages of 10 pieces.
-
Material Used: Stainless Steel 304 BA (EN 1.4301 - L20) or Copper.
To ensure that every joint is tightly secured the component has an asymmetric design. During installation the lower diameter, wider, must be placed on the female form; the upper diameter, narrower, is placed on the male form.
Hardware for securing is supplied.
-
Single Wall ‘T’ Fitting 90°
-
80mm - €59
-
-
-
Modular Circular Rosette
-
80mm (3'') - €12
100mm (4'') - €13
130mm (5'') - €14
150mm (6'') - €15
-
The Modular Circular Stainless Steel Rosette is an accessory used to cover imperfections resulting from drilling in walls or ceilings crossed by Chimney Systems or Smoke Ducts with a vertical or horizontal trend.
It is composed of two perfectly mirrored parts, this feature allows the installation of the product even following the assembly of the modules that pass through the wall or roof.
-
The Modular Circular INOX rosette is an accessory used to cover imperfections resulting from drilling in walls or ceilings, crossed by Chimney Systems or Smoke Channels with a vertical or horizontal trend.
-
Single Wall Pipes.
Black Interior Flue Pipe 250 mm
-
80mm (3'') - €19
130mm (5'') - €29
150mm (6'') - €30
-
250 mm linear element, ideal for the creation of smoke channels for internal use, whose purpose is to convey fumes coming from pellet heat generators
-
Material used: Ferrous Steel (L01120 UNI EN 1.4404).
Thickness: 1.2 mm.
Painting: Scratch-resistant silicone, resistant to high temperatures.
Gasket: in black or red silicone, included.
-
Black Interior 45° Bend
-
80mm (3'') - €35
100mm (4'') - €43
130mm (5'') - €45
150mm (6'') - €49
-
The 45° Bend is ideal for changes or shifts in direction of internal use Flue Pipes whose purpose is to convey gases from pellet burning appliances.
-
Material Used: Ferrous Steel (L01120 UNI EN 1.4404).
Thickness: 1.2 mm.
Coating: Scratch-resistant Silicone, resistant to high Temperatures.
Gasket: in Black or Red silicone, supplied.
-
Black Interior Flue Pipe 500 mm
-
80mm - €29
130mm - €39
150mm - €39
-
500 mm linear element, ideal for the creation of smoke channels for internal use, the purpose of which is to convey fumes coming from pellet heat generators.
-
Material used: Ferrous Steel (L01120 UNI EN 1.4404).
Thickness: 1.2 mm.
Painting: Scratch-resistant silicone, resistant to high temperatures.
Gasket: in black or red silicone, included.
-
Black Interior Flue Pipe 1000 mm
-
80mm (3'') - €38
130mm (5'') - €50
150mm (6'') - €55
-
1,000 mm linear element, ideal for the creation of smoke channels for internal use, the purpose of which is to convey fumes coming from pellet heat generators.
-
Material used: Ferrous Steel (L01120 UNI EN 1.4404).
Thickness: 1.2 mm.
Painting: Scratch-resistant silicone, resistant to high temperatures.
Gasket: in black or red silicone, included.
-
Explore Our Range of Wood Pellet Stoves
Our wood pellet stoves are up to 92% efficient and burn a
renewable source of energy.